In this article we will discuss about the differenttypes of beamsused in the construction. Without beams there will not be any structure which can withstand loads. They are the structural member which helps in bearing loads. If there are no beams, there will be no structure.
What is a Beam?
The beam is defined as the structural member which is used to bear different loads. It resists the vertical loads, shear forces and bending moments.
Types of Beams
The different types of beams are:
1. Cantilever Beam:
A cantilever beam is a beam that is fixed from one end and free at the other end.
In the figure you can easily see that one end i.e. A is fixed and the other end i.e. B is free. So this beam is called as cantilever beam.
2. Simply Supported Beam:
A beam which is supported or resting on the supports at its both the ends, is called simply supported beam.
In the figure, both the ends of the beam is supported by supports, one support is at endAand the other support is at endB. this beam is known as simply supported beam.
Also Read:
- What is Stress Concentration – Definition, Causes, effects and Prevention?
- Difference Between Stress and Strain in Strength of Materials
- What is Strain – Strength of Material?
3. Overhanging Beam:
In a beam, if one of its ends is extended beyond the support, it is known as overhanging beam.
As shown in the above figure, we observe that beam is extending beyond the support B, and hence this beam is called overhanging beam.
4. Fixed Beams:
A beam which has both of its ends fixed or built in walls is called fixed beam.
In the figure, both the ends of the beams are rigidly fixed in the walls, this type of beams are known as fixed beams.
5. Continuous Beam:
It is a beam which is provided with more than two supports as shown in figure.
Here we can see in the figure that the beam has more than two supports at A, B and C. This beam is called continuous beams.
This is all about the different types of beams. If you found this piece of information useful and valuable then don’t forget to like and share it.
Related Posts:
What is Heat Exchanger? - Complete Explanation-
Different Types of Bearings -
What is Mechanical Engineering? -
What are Different Types of Fluid Flow - Complete… -
37 Different Types of Hammers and Their Uses (With Pictures) -
Different Types of Screws in Fastening Process -
24 Most Common Types of Pliers and Their Uses (With… -
What is CAD - Computer Aided Designing?
please provide formulas of each